Holsters are a critical piece of equipment often taken for granted. The difference between a good holster is carrying your firearm or not. The first rule of a gun fight is to have a gun. For most of us, that means having a good holster (and belt, but that is a different story).

I started off my CCW-years using leather only. Leather is amazingly comfortable. But, in recent years, like a lot of people I moved away from leather for Kydex holsters. Kydex simply became more cost effective, thinner, lighter and for some reason the Kydex companies seemed able to add new models quicker. Over the years custom leather holster prices soared and seemed expensive. Kydex filled a category in between leather and inexpensive nylon. I even tried several less expensive custom leather companies, with mixed results. It was hit and miss.

Fast forward. I received an offer from Falco Holsters to try out one of their leather holsters. I had seen their holsters offered before on vendor sites and was curious. But, to be honest, I had never tried one before because I thought that their name was a play off of Galco Leather. It was time to give leather another try.

I was allowed to pick (from a list) of what I wanted and scrolled through the list of supported firearms (https://www.falcoholsters.com/list-of-available-guns). In particular, I was impressed by their CZ support. I have a CZ 75 Compact that is a tack driver. However, finding a good holster for it has been difficult. I have a few and none of them are satisfactory. The pistol's shape/weight is just hard for me to carry/conceal comfortably. I was pleased that Falco has a mold. Additionally, Falco has holsters for the traditional CZ75, the P01, the P07, and even the striker P10c. Impressive! CZ sells everything that they import, often with waiting lists, so I knew that CZ fans would be interested too.

Depending on what you are looking for you will like/dislike any holster maker. For newer firearms, I saw that Falco has a mold for the HK VP9 but not the VP9sk. Additionally, they have a mold for things like the Walther P99, the PPQ and even the PPX but not the PPQsc. Demand always dictates. There was nothing for the Ruger American Series while, not surprisingly, there are a number of options for the Sig P320.

Incidentally, a lot of revolvers are represented - but you may have to do your homework. For example, the only S&W 19 model they list is the 4", however, a lot of other K-frame lengths are available, but expressed in alternate model #'s (65/66, etc). I was pleased that 3"-ers are fairly well represented. I have an affinity for 3” revolvers and a quick view shows that Falco has holsters for the 3” SP101, K and L Frames. Nice!

I chose an IWB leather holster for my CZ75 Compact. I chose a model with snaps separate from the main body of the holster. In fact, the holster's configuration is due to the plethora of options available that I chose (sweat shield, cant, no retention screw, color, stitching, etc.)

The pistol itself (for those unfamiliar) is an all steel mid-size double-stack 9mm - fairly thick and heavy. It is a double-action with a hammer, kind of old school now:

Yes, it's empty:

I received the holster from Falco. Their website allows you to pick and choose the options you want, and there are a lot! It came from Slovakia and was professionally packaged:

 The back, with some basic instructions on break in, usage and care:

The holster itself:

The Falco logo distinctly marks it. Everything about the holster is professionally done. No short-cuts here.

I instantly took it out and ended up wearing it for several days.
Actually, the fact that I was able to wear it that long speaks volumes. My last holster (Kydex) I gave up on after a few hours. It was not comfortable and printed – strangely the front top of slide.
I did NOT have any of these problems with the Falco. It concealed easily in just a t-shirt (that's good for a not super thin guy like me).

There was no break-in period as the instructions implied and is often expected from a leather holster. Perhaps it is from the boning being not being super deeply embossed, but it definitely enough to ensure good fit:

My CZ75 Compact fits in it perfectly. But, if you are looking for a holster where the pistol “snaps” into it with a positive retention – more than just by gravity you will want to order an holster with the retention screw option. Since I am not anticipating being upside down I did not order it with one (that's a joke). It's just what I prefer.
This falls somewhere in the middle (not loose or tight) which is a good thing IMO.

So for actual usage...

One thing that I have to do (and dislike) is frequently disarm when going to certain places. But, I often leave my holster on so that I can re-holster when possible.
I was pleasantly surprised at how well this worked with the Falco - the holster compacts ridiculously comfortably when the pistol is not it. It does not feel bulky like a Kydex holster which retains it shape. Putting the pistol back in it is no problem with the Falco’s reinforced mouth as shown in the pic above and below:

The construction of the holster is very well done. There is double-stitching for the main body:

Threads are very thick. You have the option of picking an alternate color. 

I was a little bit disappointed that the snaps are not one-way - but they are very positive in snapping open/close and require quite a bit of force to undo. In fact, for the pics it took a bit of effort to snap/unsnap them without the pistol. These are not cheap snaps.
The Falco logo on them is a nice touch:

The sweat shield, even though from the pics looks a bit short, especially if you carry the pistol half-cock (which I do) or cocked and locked but I did not encounter any discomfort.

Hammer is actually fully covered:

I do not feel the hammer even in condition 1.

Sweat guard is rugged and is not flimsy:

Reinforced sweat guard from the back:

The muzzle is completely covered"

In short, this is a holster that has turned my CZ75 Compact into something that I would carry as an everyday CCW piece. A pretty good feat considering its almost 33oz weight.

Folks always ask for some shots of inside the holster, about the thickness, wear, etc. Here are a few:

Thickness/stiffness incidentally is nice. It is not a hard stiff like the new Galco holsters like the Concealable but not soft like the Don Hume.
Somewhere in between - I am not sure that helps.

From a slightly different angle, shows a little bit of rub marks (I am actually using it lol):

Slide top clears with no rubbing:

I have only been wearing it for 3 days now so the physical wear is minimal. No issue wearing it all day sitting with no pistol.
What is amazing is that I don't mind wearing this heavy pistol. This includes walking around or just hanging out at the house watching (and losing at fantasy) football.
I also have to mention that the finish is professionally done -- I have had a number of holster makers dye come off after a very short period of time which has always distinguished them from big brands like Galco.
This is not the case here, this holster has no signs of any of the finish/dye coming off. Oh, there is NO dye smell from the holster at all.
Incidentally, Falco Holsters also have a 5 year warranty.

If you are looking for a holster I highly recommend that you give Falco a try: https://falcoholsters.com - They are the real deal! I see some 3" revolver holsters in my future.
I do hope that they add some of the new striker compacts like the HK VP9sk and Walther PPQsc to their line in the future though.