Ok, here is some info mainly for me but may be of interest to S&W 10xx fans. I wanted to put a lot of the 10xx info together in one place. These have been compiled from various sources available on the internet.
parts diagram (holy cow -- there were only ~5000 1066's!):
manufacture stats:
FBI training diagram on lubricating their 1076:
FBI 1076 Training Manual (pdf):
fbi_m1076_instruction_guide
S&W Ad:
Detail stripping the frame is pretty easy, if you know how to put the sear in:
FBI Adoption Report:
fbi_10mm_notes
So, the 1006 is a little long so I thought I would make it a 1066. :)
The 1006 has a 5" barrel while the 1066 is 4.25". Other than that the pistols are identical, but it changes the balance quite a bit and is obviously more carryable.
1006
1066
Notice the shorter slide length in front of the dust cover.
1006 with 1066 slide assembly:
UPDATE: 10/08/2011 more pics moved from Flickr and are available in this post:
My new (to me) 1006
Well, it is from a 1006 (but not the mint one I just got). More on this one to come but here is a pic of the bubbled part which (I think) is causing the trigger to slightly catch in SA mode. Luckily, the reset is super short so one would never notice it during normal firing. However, since I have a mint 1006 next to this one to compare it was noticeable. Playing with the trigger play spring is how I noticed...So, what is this part and since it is catching on the frame, could it cause the famous 3rd gen SA trigger click? I think maybe..
What is interesting is that this 1006 is a former PD pistol and I suspect it has clicked/stuck from day 1!
UPDATE:
02/20/2011 - This part was replaced and appears that although it caught slightly it was not the cause of the clicking. I will do a complete write up on putting back together 1006 #2 shortly.
My new (to me) 1006 - a 10mm tank - and story
Written by reg mathuszSo, my first experience with the 1006 was in 1990 on a rental range. My girlfriend at the time absolutely loved it. I fell in love with the round but not the pistol -- it was big, bulky, and heavy. It was a double-action/heavy first shot with a single action in which the trigger moved dramatically towards the frame. The safety was on the slide and worked the opposite of what I thought it should. It had plastic grips and a magazine disconnect. It was also very expensive. You see, I had just recently bought my first handgun (and one that I would carry for years to come) a Springfield 1911. I still have it and pics are on this site. It was chambered in 45ACP because it was $100 more for the 10mm version and the ammo was harder to come by and more expensive. I always thought I could get the 10mm linkless version later. Little did I know.
Enter 20 or so years later. I have come to appreciate some of those "negatives" I used to disdain. I have been looking for a 1006 locally for some time. I had seen a total of two. The first one I lost because I waited for the next day to buy it. The next one the buyer decided not to sell. However, I got a phone call from my local shop asking if I still was looking for one and they had got a LNIB in trade. They put it aside for me and I got it.
I couldn't be more pleased. I still love 1911's but what the heck was I thinking back then? This pistol was far ahead of its time. And it is a tank -- by far the heaviest duty 10mm that I own (ok, my other two are 1911's).
Let's start with some pics...You can click on each one for the full view. From top to bottom left to right.
1. 1006 barrel close up - maybe the former owner shot a box or two through it.
2. Box - inside was the manual, sight adjustment tool, cleaning rod and brushes.
Product code puts it at a 1990-1 manufacture.
3. Closeup - Pics don't do it justice. My wife was surprised at how big the pistol is.
4. Feed ramp close up - remember these came out in 1990!
5. Strangely, I got one yellow follower mag (probably original) and one of the newer white follower mags with the "improved" accuguide improvement to hold the rounds from moving forward from recoil.
6. Slide to frame fit - remember this is production pistol from 1990!
7. Left side
8. 9 shot mags stood up
9. Some features ahead of their time in a production pistol. From left to right: front strap serrations (still a mainstay on S&W 1911's), undercut trigger guard (something pistols even today could learn from), checkered trigger guard
10. Side shot with slide locked open
11. Guide rod tube - this is included because a lot of Colt fans seem to think/complain if the wall thickness is not completely symmetrical. If you look REALLY close it is a little off. LOL
12. Rear sight closeup - fully adjustable with huge side shields. I like them and the way they look.
13. Reassembly wackiness - So, here is one thing that seems wacky: The hammer is cocked during disassembly (because the slide is pulled back). But, to put it back together you have to press down on three levers (I attempted to take a fuzzy picture to show, but neglected to focus). Anyway, one of those levers decocks the hammer. You then have to hold the three levers down to pull the slide onto the frame. Seems odd.
14. Guide rod and recoil spring assembly - the end is actually a spring loaded buffer. Neat.
15. Right side
16. Recoil rod fits into that notch. Does it look a little small and that you should be careful and hold onto the rod/spring while dis/assembly? It is.
All in all a beautiful pistol and probably the toughest (former) full production 10mm from a major manufacturer and I am glad to have one, but sad that it took me so long to appreciate it.
[gallery link="file" orderby="title"]
08/10/11: Pics moved off of Flikr.
2011 NRA Certified Instructor Discounts and updates
Written by reg mathuszI have recieved a few inquries if the site will be updated. I plan on working on updates beginning in Feb. I have found that it takes a month or two for vendors to update their programs. If you hear anything please let me know.
I can tell you for sure that the Blackhawk! discount code no longer works on their website (it did a month or so ago).
updated post
Well, just brought home a LNIB S&W 1006 (I will save that for another post shortly as soon as I get some pics) and found that my main safe is out of room for pistols. Or rather, needs to be rearranged, or I need to make another pistol rack.
It was easier to rearrange. So, some items are more used than others and I thought I might as well box them and save space (yeah, it really depends on the item's box doesn't it?) and stack the boxes at a large unused space in one of the bottom corners of the safe. Yes, I know it isn't the best way to store firearms to keep them pristine but it will work until I make a new rack.
So, a couple of the items going into their boxes:
- Colt Mustang Plus II (wife's) - replaced by S&W Walther PPK
- S&W 1006 - ironic since this why I made room, but the thing is brand new
- Ruger Redhawk Hunter 7.5" - did you know they don't make these in blue any more? (and you probably thought I only had S&W's)
- FN HiPower 40 - NIB (I have two)
More...
Christmas back door arbitrary gun registration!
Written by reg mathuszI just received this in email:
Dear J&G Customer,
This is a special notice to warn you of impending new gun regulation. The ATF has proposed to require gun dealers to provide directly to the ATF the names, addresses, and serial numbers for every purchase of two or more semi auto, mag fed rifles within a five day period!! They are trying to force this in by January 5th, without any approval from Congress, calling it a needed "emergency" regulation. This is backdoor registration of guns and gunowners.
Here is a quote from the notice by the NSSF (National Shooting Sports Foundation) regarding this burdensome and illegal move:
"The Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) is moving to require federally licensed firearms retailers to report multiple sales of modern sporting rifles beginning January 5, 2011. Specifically, the ATF requirement calls for firearms retailers to report multiple sales, or other dispositions, of two or more .22 caliber or larger semi-automatic rifles that are capable of accepting a detachable magazine and are purchased by the same individual within five consecutive business days."
We are encouraging everyone to contact the relevant officials to protest this move. The office that approves regulation changes like this that bypass Congress is the Office of Information and Regulation affairs of the DOJ and they can be reached at 202-395-6466. You can call your Senator and Representative at the US Capitol switchboard at 202-224-3121.
The NSSF offers the following points to make when calling
1. "Multiple sales reporting of long guns will actually make it more difficult for licensed retailers to help law enforcement as traffickers modify their illegal schemes to circumvent the reporting requirement. Traffickers will go further underground, hiring more people to buy their firearms. This will make it much harder for retailers to identify and report suspicious behavior to law enforcement."
2. "Long guns are rarely used in crime (Bureau of Justice Statistics)."
3. "Imposing multiple sales-reporting requirements for long guns would further add to the already extensive paperwork and record-keeping requirements burdening America’s retailers – where a single mistake could cost them their license and even land them in jail."
4. "Last year, ATF inspected 2,000 retailers in border states and only two licenses were revoked (0.1%). These revocations were for reasons unknown and could have had nothing to do with illicit trafficking of guns; furthermore, no dealers were charged with any criminal wrongdoing."
5. "According to ATF, the average age of a firearm recovered in the United States is 11 years old. In Mexico it’s more than 14 years old. This demonstrates that criminals are not using new guns bought from retailers in the states."
6. "Congress, when it enacted multiple sales reporting for handguns, could have required multiple sales of long guns – it specifically chose not to."
Read the full notice by the NSSF here:
http://www.nssfblog.com/atf-to-require-multiple-sales-reports-for-long-guns/
Read the full ATF document proposing this illegal move here: (PDF)
http://www.washingtonpost.com/wp-srv/politics/documents/atf.pdf
from Coonan:
"Great news, we’re shipping pistols! We expect to be shipping up to 10 pistols a day to fill the orders that have been placed, and are making every effort to ship all pre-orders so you have them by December 24th"
So, who bet against me that the Coonan would ship before the Vltor Bren-Ten (formerly known as the Fortis)?
Congrats Coonan!
For those unfamiliar with the mighty 1911 chambered in 357MAGNUM (the revolver round not the 357Sig) here is a pic from their website Coonaninc.com
Awesome!
Looking for a custom 10mm? Try the Springfield Armory Custom Carry!Sp
Written by reg mathuszSo, I have been musing some sort of custom 1911 for awhile. I, however, have a hard time raising and then spending the significant amount of money required. Note that I am not saying that it isn't worth it, just that it is quite a hit to wallet.
So, much to my surprise Springfield Armory WILL put together a Custom Carry in 10mm!!
Note: This is from the SA Custom Shop. They are quite a step up from a production pistol like a TRP (and the TRP is quite a pistol in itself). The CC's are VERY well reputed for craftmanship rivaling other custom brands (although less talked about). I only asked about the CC with a few extra options, but I am sure other models could be done also like the Custom PRO.
The price difference vs a 45 was negligible. Thought I would share, as I muse my finances for 2011.
Ok, the free webhost that I was using lost its mySQL server. The data is coming back but I don't know when. I was able to create a new site and import my last backup. Unfortunately, it is a few months old so some content is missing.
Site is also a little slow since I had converted the flikr links to local storage to increase speed. Also, some of the old links still reference the old site, which of course, don't work :(
But it is good to be back!
![[gallery link="file" orderby="title"]](http://fortreg.com/firearms/wp-content/uploads/2011/01/5460265193.jpg){kind=link}